top of page
Pekin Fire Company 2014-04-13

Pekin Fire Company 2014-04-13

Location: Sanborn, NY 14132 USA

Model: B-5 Chaparral Xtreme Brush Truck/Type 5 Wildland Engine

Chassis: 2014 F-550 Reg Cab Gas

Delivered: 2014-04-13

Serial #: 1305RX20

 

Features:

  • Premium 12 ga. Steel Superstructure
  • “Pump and Roll Fire Attack Operational Area” is a Seated or Standing BATROPS crosswalk that meets SAEJ1194 Standard for roll-over protective structures.
  • BATROPS area includes brush protection structure
  • Full Body Harness (1 Harness 6 Retractors)
  • Removable Light Bar Mounting Platform with Brush Guard
  • Light Bar Rack on Headache Rack
  • Chest Saddle Safety Gates
  • 3 Wing Rear Bumper w/ Tow Loop (max tongue weight 800 lbs)
  • Transverse Crosswalk Hand Rail
  • Superliner-lined Crosslay
  • Corashield Under Body Coating
  • Customized Pump Panel w/ Flip Up Lid & Plumbing, all controls are located in the walkway
  • Aluminum Trim Package
  • Mud Flaps
  • 23 HP Briggs Engine with Hale HPX200 Pump
  • Recessed 500 gal. Poly Tank
  • Tankvision Water Level Indicator
  • Pre-Connected 1 ½” Transverse Crosslay
  • 2-1/2 in Full Port Valve - Tank to Pump
  • 2-1/2 in Full Port Valve - Pump to Draft
  • Hand-operated Drafting Capability
  • Whelen Justice LED Light Bar
  • Wig-Wags
  • Hands Free Siren Controls
  • Ground Lighting/Work Lights
  • Console Dash Mounted Control for Siren & Radio
  • No Floorboard-mounted Controls allowing a 3rd person to ride
  • Chassis Interior Electrical Panel with Color-coded wiring
  • Dedicated Ground to all Lighting starting at battery
  • Ignition-operated Emergency Master Disconnect
  • Back-up Alarm
  • Commercial Chassis Electrical System
  • 500 LED Lights On Rear of Truck
  • 4” Reflective Stripe on Bed Rail
  • Triple Strip on Bottom Chassis Doors
  • Sandblast and Prime - Body Prep
  • Paint-Poly Urethane - PPG

 

Options:

  • Solid Bottom Wheel Chocks (1 set of 2) (Mounted) (NFPA 1906)
  • 5 lb Dry Chemical Fire Extinguisher w/ 40-B:C and mount bracket (NFPA 1906)
  • 4 Light Full View Tank Level Indicator (2 sides)
  • Second Whipline incl. Full Body Harness
  • Front Incorporated Underneath Cribbing Box (only 1 if genset)
  • Rear Incorporated Underneath Cribbing Boxes (left & right Must Upgrade to 3x10 Rear Step Bumper)
  • 6” Incorporated Side Rails (2 sides)
  • Under Roll Bar Box (2 sides)
  • Two Door Top Incorporated Tank Compartment w/ 2 Pull-Down Steps (superliner on top of bed and 2 hand rails)
  • Bumper Grille Guard with 12,000 lb. Winch
  • Front Bumper Sweeps (THREE Nozzle Sweeps, 2 corner, 1 center)
  • BLESS (Mounted)
  • Exoskeleton Branch Deflector
  • UPGRADE to 3x10 Rear Step Bumper with Reflective Strip
  • Receiver Hitch
  • Fixed Tow Loop
  • Lettering on Doors (doors only, 4-color graphics not covered)
  • Chevron Striping per sq ft.
  • Shark Hide Protective Coating on Exposed Aluminum
  • Super Swamper Singles tires, wheels, Lift Kit & Suspension Modification (OEM to keep factory take off's) (will include nerf bars, front mud flaps)(superliner on front of bed/headache rack)
  • Spare tire for super swamper tires-mounted and balanced
  • 6 ton Bottle Jack, 24" breakover wrench, 5" extension, 21" deep 6 point socket
  • Portable 2000 Honda Generator w/ two 650 telescoping lights
  • 500 Series LED Strobes
  • UPGRADE to LED Stop-Turn Tail Light
  • UPGRADE LED Lightbar (add 2 LED lights to front)
  • Super LED Round Beacon Flat Mount
  • GoLight Spot Light (Mounted) w/ Dash Mounted Remote (NFPA)
  • Auto Eject & Battery Maintainer
  • 1” Hose Reel 100’
  • SCBA Brackets
  • SCBA Bottle Rack - 4 Bottle Storage- Must have Lower Front Cribbing Box
  • Traffic Control (10 Cones, 2 Hand Held Signs, 2 Reflective Vests)
  • Rescue Chain & J Hook Set
  • Spanner Wrench Set (Mounted)
  • Pike Pole (Mounted)
  • Flathead Shovel (Mounted)
  • Spade Head Shovel (Mounted)
  • 6 Foot Wrecking Bar (Mounted)
  • 6 lb Flat Head Axe w/ Fiberglass Handle (Mounted)
  • 6 lb Pick Head Axe w/ Fiberglass Handle (Mounted)
  • McLeod Fire Tool (not Mounted)
  • McLeod Fire Tool (Mounted)
  • Haligan Tool (Mounted)
  • Pry-Bar “Small” (Mounted)
  • 20" Pry-Bar (Mounted)
  • 24 in Roof Tool (Mounted)
  • 10 lb Fire Extinguisher w/ Mounting Bracket
  • 20 lb Fire Extinguisher w/ Mounting Bracket
  • 2-1/2 gal. Water Fire Extinguisher w/ Mounting Bracket
  • 3 ft Drywall Hook w/ “D” Handle (Mounted)
  • Rubber Mallet (Mounted)
  • Vulcan flashlight (Mounted)
  • 60 in Fire Rake w/ Fiberglass Handle (Mounted)
  • Fire Swatter (Mounted)
  • Res-Q-Rench
  • Hand Tool Kit
  • 1030 Akron Forestry Nozzle
  • 1702 Akron Turbojet Nozzle with Pistol Grip
  • Nozzle Bracket for 1702 Nozzle
bottom of page