Goltry VFD 2013-12-09
Location: Goltry, OK 73739 USA
Model: B-8 Chaparral Brush Truck/Type 4 Wildland Engine
Chassis: 2010 F-700
Delivered: 2013-12-09
Serial #: 1308R11
Features:
- Premium 12 ga. Steel Superstructure
- “Pump and Roll Fire Attack Operational Area” is a Seated or Standing BATROPS crosswalk that meets SAEJ1194 Standard for roll-over protective structures.
- BATROPS area includes brush protection structure
- Full Body Harness (1 Harness 6 Retractors)
- Removable Light Bar Mounting Platform with Brush Guard
- Light Bar Rack on Headache Rack
- Chest Saddle Safety Gates
- 3 Wing Rear Bumper w/ Tow Loop (max tongue weight 800 lbs)
- Transverse Crosswalk Hand Rail
- Superliner-lined Crosslay
- Corashield Under Body Coating
- Customized Pump Panel w/ Flip Up Lid & Plumbing, all controls are located in the walkway
- Aluminum Trim Package
- Mud Flaps
- 23 HP Briggs Engine with Hale HPX200 Pump
- Recessed 750 gal. Poly Tank
- Tankvision Water Level Indicator
- Pre-Connected 1 ½” Transverse Crosslay
- 2-1/2 in Full Port Valve - Tank to Pump
- 2-1/2 in Full Port Valve - Pump to Draft
- Hand-operated Drafting Capability
- Whelen Justice LED Light Bar
- Wig-Wags
- Hands Free Siren Controls
- Ground Lighting/Work Lights
- Console Dash Mounted Control for Siren & Radio
- No Floorboard-mounted Controls allowing a 3rd person to ride
- Chassis Interior Electrical Panel with Color-coded wiring
- Dedicated Ground to all Lighting starting at battery
- Ignition-operated Emergency Master Disconnect
- Back-up Alarm
- Commercial Chassis Electrical System
- 500 LED Lights On Rear of Truck
- 4” Reflective Stripe on Bed Rail
- Triple Strip on Bottom Chassis Doors
- Sandblast and Prime - Body Prep
- Paint-Poly Urethane - PPG
Options:
- Single Foam Injection System w/Foam Transfer Pump
- Incorporated CAFS (Single Line)
- Second Whipline incl. Full Body Harness
- UPGRADE to 1,000 gal. Poly Tank
- Pump Panel Compartment Storage (Mounted)
- Front Incorporated Underneath Cribbing Box (only 1 if genset)
- Rear Incorporated Underneath Cribbing Boxes (left & right Must Upgrade to 3x10 Rear Step Bumper)
- Under Roll Bar Box (2 side)
- Custom Flip Down Front Bumper/Grille Guard with 12,000 lb. Winch
- Front Bumper Sweeps (THREE Nozzle Sweeps, 2 corner, 1 center)
- UPGRADE to 3x10 Rear Step Bumper with Reflective Strip
- Manual Pull-Out Drop Down Step
- Portable 2000 Honda Generator w/ two 650 telescoping lights
- 500 Series LED Strobes (total of 10 2 in the grille guard)
- Wildland Fireline Lights (2 on Lightbar and 2 on rear)
- UPGRADE to LED Stop-Turn Tail Light
- Super LED Round Beacon Flat Mount
- GoLight Spot Light (Mounted) w/ Dash Mounted Remote (NFPA)
- Installed Customer Radio and Antenna
- Faceplate, wiring and bracket for Customer Radio
- 3/8” Pre-Connected 50’ Air Hose Reel
- 1” Hose Reel 150’
- SCBA Brackets
- Spanner Wrench Set (Mounted)
- 2 ½” 10 ft Clear Hard Suction (NFPA 1906)
- 2 ½” Barrel Strainer for Hard Suction (NFPA 1906)
- 1030 Akron Forestry Nozzle
- BEAST ( Blanchat External/Interior Attack Structure Tool)
- Top Hose Bed - Skid Mounted Over Tank
- Mount Customer Ladder
- Mount Customer Hand Tools
- SCBA Bottle Storage
- Left and Right Doors for Top Storage
- 2-1/2 Rear Discharge at the pump